Methods of Gift Packaging

Posted by House Day on

The basic tying method of bowknot No matter what, even if there is no wrapping paper or box, it is not packed in the bag. As long as you tie a ribbon, it will become a gift in an incredible moment. If you tie a beautiful bow, it will immediately add to the charm of the gift itself.

Methods of Gift Packaging

Bow tie method:

1. Tie a knot between the two ends of the ribbon.

2. Press and hold the middle position with your hand and bend the wire on the right side into a circle irregularly.

3. Fold the ribbon on the left side from above and hold it down with the thumb of your right hand.

4. Pass around the top of the right ribbon loop and then pass through the loop formed by the left ribbon.

5. The original ribbon loop on the right side was placed on the left side, and the ribbon passed through the circle formed by the ribbon on the left side was tightened on the right side.

6. Trim the ends of the ribbon into the shape you like, and the bow is finished.

(2)-the method of tying the bowknot on the upside down   

This is a bow tie method using the front and back sides with the front facing outward:

1. Tie the ribbon horizontally with the front facing outward

2. Fold right into petal size

3. The petals folded out from the left are longer than those from the right

4. As shown in the figure, cross left and right and leave a hole in the center.

5. The long side penetrates through the hole.

6. Sort left and right into equal size

7. Cut the ribbon to a suitable length according to the size of the bow, and it is finished.

(3)-basic cross-shaped ribbon tying method

This is the most basic ribbon tying method. When the position of the cross changes, the feelings expressed by the gift will also change. You can put ribbons on cards or small items to change and experience the fun in the foundation. The cross-shaped ribbon is very simple and can set off the taste of the gift itself.

Octagonal method

1. Prepare a ribbon 4 times longer than the length, width and height of the box. This is the necessary length for bowknot

2. First, set aside the necessary length for bowknot, and then make a circle vertically.

3. Turn it to the middle part. Turn the two ribbons crosswise and then make a circle crosswise.

4. Pass through the ribbon originally left as shown in the figure.
5. Tie the ribbon worn from below into knots and tie it well.
6. In this way, a simple and beautiful bow will be tied.

(4)-basic double diagonal ribbon tying method

This is a very attractive ribbon Department of law, can show the grade of the sender. In addition to the simple cross   

Double slash system method

1. Prepare ribbons 3 times longer than the length, width and height of the box. Leave enough length for bowknot

2. Tilt the ribbon as shown in the figure 3. Pay attention to arranging diagonal ribbons in parallel and then roll them up 4. Pass the left ribbon under the right ribbon.
5. Make a beautiful bow 6. In this way, the front and back sides become two parallel oblique ribbons.

(5)-Basic V-Ribbon Tie V-shaped system gives people a very beautiful, clear and elegant feeling. When giving gifts to people who love beauty, men or elders, it will achieve a surprise effect.

V-shaped system

1. Prepare ribbons 4 times longer than the length, width and height of the box

2. Set aside the necessary length for bowknot, and make a vertical oblique circle as shown in the picture.

3. Make another longitudinal oblique winding

4. Pass through the ribbon left at the beginning as shown in the picture and fix it.

5. Bend the ribbon worn from below into a circle and tie a knot. In this way, the beautiful V-shaped knot is completed.

(6)-Basic Packaging Method of Square Sugar   

Square sugar type packaging method for square articles

1. Cut the wrapping paper to a length of 2-3cm around the box and a width of 3cm with the bottom of the box facing up and placed in the center of the paper.

2. Fold the paper on the right into the box and keep the edge of the paper in the center of the box

3. Fold the left paper in again 4. Use transparent adhesive or double-sided adhesive tape to fix the overlapping parts of the paper

5. The paper on both sides is folded inward along the box.

6. Fold the paper into a beautiful trapezoid in sequence.

7. lightly mark the junction of upper and lower origami paper 8. keep the mark parallel to the edge and fold the underlying paper 9. Fix the joint with double-sided adhesive tape or a beautiful sticker, wrap the other side, turn over to the front of the box, and decorate it with ribbons or flowers.

(7)-Thin Gift Box with Basic Inclined Packaging Method

This is one of the most basic packaging methods. Wrap the gift box with paper at a certain angle. You can wrap the corners beautifully in sequence. Once you become proficient, wrapping presents will become very simple. It is very useful to master this method.

Inclined packaging method for thin gift box

1. Prepare the paper, as shown in the figure, fold the paper inward along the edge of the box so that the corner of the paper is above the box cover.

2. Then fold the rear paper to the front to ensure it can cover the whole box. If the conditions of 1 and 2 cannot be met, the paper size does not meet the requirements.

3. Press and hold the top corner, fold the left side of the paper and receive the excess paper cleanly inside

4. Use adhesive tape to fix the upper folding angle and the left folding angle. Fold the paper behind or slowly lift the box

5. While sorting out the surplus paper, turn the box over to the inside.

6. The paper on the right side can be folded inward in the same way as the paper on the left side, keeping the folding vertical.

7. The rest of the paper should be folded inward and arranged properly.

8. Finally, fold the extra corners inward, fix them with double-sided adhesive tape, and tie the ribbon on the box to finish.

(8)-Thick Gift Box with Basic Inclined Packaging Method

In order to prevent the box from tilting, it is very convenient to pack the thick box with this packing method.

Packaging method of thick gift box

1. Prepare the paper. First, as shown in the figure, turn the front of the box outward and fold the paper in front of it to cover the three corners.

2. Secondly, as shown in the figure, fold up the outer paper at the same position to confirm whether the corners of the three sides are covered. Only when the conditions of 1 and 2 are met can the process proceed downwards.

3. Wrap the front of the box with the paper in front of it. The folding lines are tightly attached to the left and right corners of the box. After finishing the corners, fix them with adhesive tape.

4. Press and hold the pressing position as shown in the figure, and then lay down the box and wrapping paper to the outside.

5. Lift up the paper on the right side as well, fold it tightly against the corner of the box, then fold it tightly against the corner of the box to the outside just like on the left side, and fix it with adhesive tape. Fold the excess paper inward and pack the front side well.

6. The paper on the bottom of the right side is folded inward to form a neat fold line that clings to the corner of the box. The paper erected on the outside cannot be exposed to both sides. Fix it with adhesive tape, and then arrange the front side properly.

7. Fold the outer paper to one side of the body, fold the excess paper inward along the edge of the box, and fix the edge with adhesive tape

8. Turn the box to the front, wrap it up, tie ribbons or decorate it.

(9)-Double Bow Packaging Method with Warm Spring Feeling

This season, you can open the window and let the fresh wind blow in. How about inviting friends to a buffet at home? You can prepare some lovely gifts such as small cakes and flowers, black tea with ribbons on the cans, etc. This packaging method is suitable for more casual gifts.

Key points: tie a bouquet-like bow for the gift. the double bow gives people a luxurious feeling.

1, make a knot. While holding down the knot with your right hand, pull up the ribbon on the left. Tie another knot, but the second knot cannot be tied.

2. Overlap the two ribbons, make a circle on the left hand, then pass the two ribbons through the middle of the two knots, open the two ribbons that pass through, and make a circle slightly smaller than the left hand.

3. Use the left-hand loop to tighten and shape it   

This method is suitable for pastry and cooking made by hand. In order to be able to see the real thing, a transparent cellophane bag will have manual texture. Whether giving or receiving gifts, this small gift will make the meeting more pleasant.

(10)-Fresh cylindrical gift packaging method

This is a slightly tricky packaging method. The folds concentrated in the center can add elegance to the gift. After mastering, no matter what size the article is, it can be applied. Hope to create a cool atmosphere in summer through gifts, so wrapping paper should choose a combination of blue and white. A simple and fresh ribbon will also be very lively when packaging wedding gifts.

Key points: To make round wrinkles look more beautiful, you must have patterned wrapping paper. In the cylinder packaging method, the wrapping paper should not be too prominent, but the decorative effect of the thread belt should be used to achieve the perfect effect.

1. Prepare improvement paper as shown in the figure.

2. Wrap the paper around the cylinder and fix it at the overlap with adhesive tape.

3. Fold the paper to the center of the circle in sequence to make beautiful wrinkles.

4. Fold the surplus paper obliquely inwards at the closing part of the crease.

5. Fix it gently with adhesive tape in the center, cut the paper of the same material into a circle, stick double-sided adhesive tape on the inner side, and then stick it on the center. Tie the ribbon on the opposite side in the same way to finish.

(11)-Packaging Method Containing Harvest Meaning

Autumn is the harvest season. If you are surrounded by fruits and delicious wine, how about putting them in bamboo baskets as gifts? Using bamboo baskets to combine various items together for gifts is the most convenient method and can also improve the quality of gifts. It is also suitable for the combination of bride's gift and baby's gift.

Key points: Please choose a ribbon that matches the size of the bamboo basket. Articles placed in bamboo baskets. Can be wrapped with 1~2 ribbons, which will make the appearance more beautiful. When giving food, the red ribbon can reflect the sweet feeling, and a greeting card with coordinated colors is even more icing on the cake.

Method for tying bow for bamboo basket

1. Use the hand holding the bamboo basket to make a bow, prepare a long ribbon, roll it on the handle holding the bamboo basket, and make a beautiful bow.

2. Simple method is convenient and creative packaging is completed.

3. put the items in, then see if it is suitable, choose 1~2 of the important items and tie ribbons   

(12)-The bowknot is indispensable for the beautiful packaging of spherical bowknot.

By changing the position of the bow, you can see completely different effects. By changing the size and material of the bow, you can experience different moods. On the packaging of Christmas gifts, you can attach greeting cards and accessories to convey your feelings.

The following is a description of the tying method of the ball bow:

1. Wrap a 1.5m long ribbon around a circle with a diameter of 10cm and repeat for 5-6 times

2. Hold the central part tightly

3. Press the middle part with your fingers, as shown in the figure, and trim the angle with scissors.

4. Overlap the cut parts to the middle and align them

5. Tie the central part with a 10 cm long ribbon prepared at home and abroad.

6. From inside to outside, put ribbons Pull out from the inside and turn out all the upper ribbons alternately left and right.

7. Pull out the lower ribbon in the same way, and then finish with a ball bow at the beginning.

8. Decorate the gift box with the bowknot.

(13)-French Bow The bowknot is indispensable for beautiful packaging.

By changing the position of the bow, you can see completely different effects. By changing the size and material of the bow, you can experience different moods. On the packaging of Christmas gifts, you can attach greeting cards and accessories to convey your feelings.

Here's how to tie a French bow:

1. Prepare a 20 cm long ribbon, fold one end of the 1 meter long ribbon into a 10 cm large circle, and circle around the circle

2. Overlap the rings alternately up and down 3. Round more than three circles

4. Place a ribbon 20 cm long below

5. Wrap glass filaments around the middle of the circle.

6. Completed   

Candy packaging Some soft gifts, such as napkins, are best packaged in this way. You might as well send this "candy" to children or lovers to make them sweet to the heart!

Material:

Two sheets of rectangular decals Paper size- Long: reserve another 32-34cm for gift length.

Width: add at least 5cm to completely wrap the gift.

Steps:

1. Place the two decals irregularly at an oblique angle to highlight the two colors.

2. Place the gift in the center of the decal, roll it up from bottom to top, and stick it firmly with gummed paper.

3. Tighten left and right

4. Tie a ribbon into a bow.

5. Completion

Tip:

Use cellophane, colorful or 2 pieces of colored paper with strong color contrast, the effect will be better.

Polygonal packing method This packing method can be applied to pentagonal or polygonal gift boxes. The packing method is basically the same. Now, hexagonal gift boxes are used as an example.

Material:

One piece of rectangular decal paper Paper size- Length: The sum of the lengths of the sides of a polygon Width: diagonal length plus box width Steps:

1. The paper must be folded at the edge of the angle.

2. Wrap the box with paper and stick it firmly with gummed paper.

3. Based on the center point, each side is folded toward the middle.

4. Insert the final corner into the first corner , and then stick adhesive paper on it.

5. Tie the bow with the cross method.

Tip:

1. The paper size must be accurate, otherwise affect the effect.

2. The effect is better if the adhesive opening on the box side is just at the edge.
Square packing method This packing method is only applicable to square gift boxes.

Material:

One piece of square decal paper Paper Size-Figure 2 As shown, the principle is to cover the box.

Steps:

1. Place the bottom of the gift box up , placed in the center of the decal.

2. Fold your paper up.

3. Fold the paper on opposite sides in the same way and stick it firmly with gummed paper.

4. The left and right sides are the same folding method.

5. Fix it with gummed paper and tie a ribbon.

Tip:

The paper must be cut into squares to complete this packing method.
Rotary packaging method This Japanese department store's most commonly used packaging method is characterized by selecting one corner of the gift box, turning it on the diagonal of the paper, and sticking it with only a piece of gummed paper. It is a very skillful packaging method.
Material:

Paper Size-Depending on the volume of the gift box, its measurement method is:

1. as shown in fig. 1, 2cm of paper in the right corner is left to place the box.

2. Turn the box diagonally for one turn, leaving 2cm of paper at both corners.

Steps:

1. As shown in the figure, place the lid of the box on the corner of the paper with the diagonal line attached.

2. Fold according to the angle of the two side edges of the box and cover it with side paper. Note that the folding angle of the paper must match the edge of the box.

3. Fold the opposite side of the box out of the angle and raise the right front side. Fold the extension line of the box and leave a crepe in the middle.

4. Turn the box to the opposite side. The folding angle of the paper must match the line of the box.

5. The other two sides are folded in the same way, and finally completely cover the box.

6. Finally, glue gummed paper to fix the position.

Tip:

1. In order to avoid displacement, glue gummed paper to fix it after step (1) is completed.

2. When folding out the angle, remember that the paper edge and the box edge must be perpendicular.

3. If there is excess paper protruding after step (5), fold it in and align it with the fold line.

Round box packing method The round box packing method is basically the same as the polygonal packing method, but as there is no straight line to follow, more attention should be paid to the packing.
Material:

One piece of rectangular decal paper Paper size- Length: circumferential length plus 1-2cm Width: diameter of round box plus thickness of box side Steps:

1. Place the box in the center of the paper, wrap it around the circumference and fix it with double-sided adhesive paper.

2. The other side adopts the same folding method.

3. Insert the final corner into the first corner.

4. Tie a bow with the cross method.

 

Older Post Newer Post

RSS